A special thank you to Heather for asking me to share the features of one of my favorite sewing tools! Choosing one was difficult. Kinda like asking which of your kids you like best. But since the task at hand was to choose just one, I looked around my work and home sewing studios, plus checked out the my sewing set for Sewing With Nancy at the TV station and found that I have at least three 5-in-1 Sewing Gauges at each location. (You only need one, sometime I’m slightly obsessive.)
I developed this tool with Clover Needlecraft. The 5-in-1 Sliding Gauge is a multifunctional gauge for marking, measuring and more. This tool is so versatile you’ll find it handy for each of your creative projects. I can’t wait to share the many uses for one of my new favorite notions.
The 5-in-1 Sliding Gauge has a unique design—it’s compact, yet versatile!
Let’s take a close up of this clever design.
It’s a six-inch ruler, marked in 1/8” increments (Left side of ruler begins at 1” and ends at 6” inches. Right side of ruler is reversed beginning at 6” and ending at 1”).
The cursor slides and then locks into position with a push of a button. The top of the cursor shows the selected measurement.
The top of the gauge and cursor has 1/4” markings.
The width of the ruler is 5/8”.
Each side of the ruler is 1/4”.
The open space in the center is 1/8”.
Finally, the end of the gauge features a compass pivot point—that’s a very unique feature. Details to come later!
Here’rs my five favorite uses for the 5-in-1 Sliding Gauge:
1.) Spacing and Marking Buttonholes:
Slide the cursor and set it to the measurement the distance between buttonholes.
Align the edge of the ruler to the center marking.
Position the top edge of the gauge to the placement of top buttonhole.
Trace the top edge of the gauge the length of your buttonholes Next, trace the top edge of the cursor.
Slide the gauge down. Align the top of gauge to second buttonhole marking. Again, trace. Repeat the process until all buttonholes are marked.
2.) Seam Allowances:
Use the handy 5/8” ruler width to mark and check garment seams.
Or, get a truly accurate 1/4″ seam with when changing the needle position.
3.) Hem Gauge:
Slide the cursor and set it to your pattern’s hem width measurement. Remember the gauge locks in place!
Fold up the hem and press or pin.
4.) Circle Compass:
With the push of a button, slide the cursor to desired marking equaling the circle radius, or half your circle size.
Hold the compass pivot with a pin or stiletto/awl.
Insert the point of a marking tool into the cursor opening, and draw circles and arches.
Mark directly onto fabric, template material, or freezer paper.
5.) T-Gauge:
When you need to measure both length and width at the same time, use the T-Gauge feature.
The top edge of the gauge measures 2-1/2” —the numbered hash marks are along the top edge making it a convenient marking
Mark and measure both length and width at the same time.
I know that every time you sew, quilt, embroider, or even knit, you’ll be relying on this versatile tool
I developed this tool with Clover Needlecraft. The 5-in-1 Sliding Gauge is a multifunctional gauge for marking, measuring and more. This tool is so versatile you’ll find it handy for each of your creative projects. I can’t wait to share the many uses for one of my new favorite notions.
The 5-in-1 Sliding Gauge has a unique design—it’s compact, yet versatile!
Let’s take a close up of this clever design.
It’s a six-inch ruler, marked in 1/8” increments (Left side of ruler begins at 1” and ends at 6” inches. Right side of ruler is reversed beginning at 6” and ending at 1”).
The cursor slides and then locks into position with a push of a button. The top of the cursor shows the selected measurement.
The top of the gauge and cursor has 1/4” markings.
The width of the ruler is 5/8”.
Each side of the ruler is 1/4”.
The open space in the center is 1/8”.
Finally, the end of the gauge features a compass pivot point—that’s a very unique feature. Details to come later!
Here’rs my five favorite uses for the 5-in-1 Sliding Gauge:
1.) Spacing and Marking Buttonholes:
Slide the cursor and set it to the measurement the distance between buttonholes.
Align the edge of the ruler to the center marking.
Position the top edge of the gauge to the placement of top buttonhole.
Trace the top edge of the gauge the length of your buttonholes Next, trace the top edge of the cursor.
Slide the gauge down. Align the top of gauge to second buttonhole marking. Again, trace. Repeat the process until all buttonholes are marked.
2.) Seam Allowances:
Use the handy 5/8” ruler width to mark and check garment seams.
Or, get a truly accurate 1/4″ seam with when changing the needle position.
3.) Hem Gauge:
Slide the cursor and set it to your pattern’s hem width measurement. Remember the gauge locks in place!
Fold up the hem and press or pin.
4.) Circle Compass:
With the push of a button, slide the cursor to desired marking equaling the circle radius, or half your circle size.
Hold the compass pivot with a pin or stiletto/awl.
Insert the point of a marking tool into the cursor opening, and draw circles and arches.
Mark directly onto fabric, template material, or freezer paper.
5.) T-Gauge:
When you need to measure both length and width at the same time, use the T-Gauge feature.
The top edge of the gauge measures 2-1/2” —the numbered hash marks are along the top edge making it a convenient marking
Mark and measure both length and width at the same time.
I know that every time you sew, quilt, embroider, or even knit, you’ll be relying on this versatile tool
No comments:
Post a Comment